Skip to Content

Instrukcja korzystania z Biblioteki

Serwisy:

Ukryty Internet | Wyszukiwarki specjalistyczne tekstów i źródeł naukowych | Translatory online | Encyklopedie i słowniki online

Translator:

Kosmos
Astronomia Astrofizyka
Inne

Kultura
Sztuka dawna i współczesna, muzea i kolekcje

Metoda
Metodologia nauk, Matematyka, Filozofia, Miary i wagi, Pomiary

Materia
Substancje, reakcje, energia
Fizyka, chemia i inżynieria materiałowa

Człowiek
Antropologia kulturowa Socjologia Psychologia Zdrowie i medycyna

Wizje
Przewidywania Kosmologia Religie Ideologia Polityka

Ziemia
Geologia, geofizyka, geochemia, środowisko przyrodnicze

Życie
Biologia, biologia molekularna i genetyka

Cyberprzestrzeń
Technologia cyberprzestrzeni, cyberkultura, media i komunikacja

Działalność
Wiadomości | Gospodarka, biznes, zarządzanie, ekonomia

Technologie
Budownictwo, energetyka, transport, wytwarzanie, technologie informacyjne

Experimental Study on the Growth of Diameter for Coiled Tubing under Different Internal Pressure

It was well known that CT (Coiled tubing) worked under severely plastic deformation and was used widely in the oil field with its special advantage. Under the interaction of bending, axial loads and internal pressure, especially over 20 MPa the growth of diameter was quick and the deformation of the pipe was serious which would lead to the incompatibility failure, or the accidents resulting from the mechanism declining. So the study on the sectional deformation of the pipe during severely plastic deformation was very important for the safety operation. In this study, the full-scale fatigue experiment was subjected on the fatigue machine of CT under different internal pressure and the testing experiment of diameter was carried on. The variation and distribution of the growth of the diameter to CT along the bending board were discussed which would provide reliable basis for judging the dangerous place and the stress concentration area. The laws of the growth ratio of the maximum diameter during the fatigue deformation were found which could evaluate the degree of the deformation. And the real-time monitoring of diameter could predict the remaining life.

Journal of Software Engineering 2013/06/21 - 13:57 Czytaj